kgt graphic machines KGT Kool Graphic Trade B.V.

Edisonweg 1 - 5482 TJ Schijndel - The Netherlands
PO Box 123 - 5480 AC Schijndel
Tel 31-(0)73-54-42500 - Fax 31-(0)73-54-94064
e-mail: kool@kgt.nl - website: www.kgt.nl

date: d-m-Y

Guillotines

Polar 66, 2001
Ref.: 51378
Equipped with: ., Working width 66 cm, Programme, 2 knives, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

Wohlenberg 137, 2000
Ref.: 51552
Equipped with, ., Monitor with program, Main air table chromed, 2 side tables chromed with air, 1 extra knife, ASE automatic waste disposal system, (waste is collected and removed underneath the front table), ., Baumann NUP 650 pallet lift, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

Wohlenberg 155, 1997
Ref.: 51738
Equipped with: ., Polar pile lift (old model), Polar jogger, model RAB 5, age 1994, Wohlenberg cutting machine, model 155, Resopal side table left with air, Chromed cutting table with air, Resopal side table right with air, KS-Master unloader, , Furthercomplete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Wohlenberg Cut-Tec 115, 1996
Ref.: 51604
Equipped with: , Cutting line existing of:, , 1 Baumann pile lift with steelplate, model NUP 10/FO, ., 1 Baumann jogger with air removal roller, model BSB 3L, ., 1 Wohlenberg guillotine, model 115 Cut-Tec, with: Colour monitor, Chromed cutting table with air, Resopal side table left with air, Resopal side table right with air, Photocell protection, 2 knives, Plexiglas cover for back table, ., 1 Baumann unloader, model BA 3N, , Further complete with: Instruction manuals, Spare part catalogue, Electricalwiring diagrams.

Wohlenberg Cut-Tec 137 PS, 1996
Ref.: 51597
Equipped with: ., Colour monitor, Cutting table with air nozzles, Resopal side tables left and right with air nozzles, 2 knives, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams, , .

date: d-m-Y

Pile lifts

Baumann NUP650,
Ref.: 51758
Standard equipped.

Polar L 600-G 3, 1993
Ref.: 51823
Pile lift.

Polar L 600-G 3, 1992
Ref.: 51824
Pile lift.

Polar pile lift, model L600/3, 1987
Ref.: 51755


date: d-m-Y

Paper joggers

Polar RAB5, 1991
Ref.: 47420
Jogging table, , Equipped with: ., Air removal roller, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

date: d-m-Y

Palletizers

Knorr L-450-1 W, 1999
Ref.: 50883
Pile lift, , Further standard equipped.

Baumann BA3, 1990
Ref.: 43067
Standard equipped, ., .

Polar TRE 145 L 3, 1985
Ref.: 50881
Polar Deloader, ., Standard equipped.

date: d-m-Y

Miscelleaneous

Rollem BCS II, 2011
Ref.: 46319
High volume, high speed, two-directional business card slitter, . , Equipped with: ., Feeder for uncut paper ( model “Turbo feeder”), First direction slitting station, Second direction slitting station, 12-up delivery of stacks of business cards , ( 2 types of stacked deliveries available, low pile and high pile delivery ), Pump, . , Production speed: upto max 100.000 businesscards/hour, For the production of finished businesscards in size 55 x 85 mm or US size 2” x 3 ½“, ., Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Folding

Heidelberg KH66/4KL, 2004
Ref.: 51492
Equipped with: ., Pallet feeder PFH66, Pump, 4 parallel folds, Gate fold attachment, Cross fold, Cross fold to the left, Anti noise hoods over the entire folding section, Heidelberg VSA66 vertical stack delivery, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Heidelberg KI55/4KTL, 2001
Ref.: 51494
Equipped with: ., Flat pile feeder with Tremat, Counter, 4 parallel folds, folding width 56 cm, Cross fold (8 page), Buckle fold underneath first cross fold, Cross fold to the left (16 page), Anti noise hoods, Pump, ., Stahl SBP46.2 horizontal delivery with pressing unit, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

Heidelberg TD112/44, 2006
Ref.: 51782
Equipped with: ., Pallet feeder, Counter, Front-mounted slitter shafts for 1st buckle plate folding unit, Double stream equipment , 4 folding buckles in first folding section, 4 folding buckles in second folding section, Anti noise hoods on all sections., Stahl SBP86 vertical delivery with pressing, age 2006, , Excluding pumps, Machine was connected to centralized air system, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Heidelberg TH56/44, 2010
Ref.: 50200
Equipped with: ., Fully automatic format setting, Flat pile feeder, Pumps, Suction belt in feeder, Touch screen monitor, First folding section, 4 automatic folding buckles, width 56 cm, Second folding section, 4 automatic folding buckles, width 56 cm, Stream delivery model SAK-56, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

MBO K 660/4S KTL, 2004
Ref.: 51934
Equipped with: ., Pallet feeder, Excluding pump, Counter, 4 parallel folds, folding width 66 cm (4 page), Cross fold (8 page), Buckle fold underneath first cross fold, Cross fold to the left (16 page), Anti noise hoods over the entire folding section, .MBO SBAP 46 ME delivery, age 2004, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

MBO K66/6PKZ, 1991
Ref.: 51752
Equipped with: ., Flat pile feeder, Pump, 6 parallel folds, Cross fold, Cross fold to the left and right , MBO ASP 66-2 ME stream delivery, age 2000, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

MBO T45/44, 1993
Ref.: 51744
Equipped with: ., Pile feeder, Pump, Stream delivery, model A56 no 930514340 (incomplete), , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

MBO T52-1-52/6-4, 1993
Ref.: 51756
Equipped with: ., Flat pile feeder, Pump, 6 folding buckles, Anti noise hoods, Stream delivery model A56 DC, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Stahl TD78/46, 1995
Ref.: 45110
Equipped with: ., Round pile feeder, Counter, Pumps, ., 1st folding section 4 buckles, 2nd folding section 6 buckles, No anti noise hoods, ., Stahl SBP46.D delivery, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiringdiagrams.

Stahl TD94/46, 1997
Ref.: 51900
Equipped with: ., Round pile feeder, First folding section 4 folding buckles, Second folding section 6 folding buckles, Anti noise hoods, Excluding vacuum pump, Horizontal stack delivery model SBP-M 46.2 age 1998, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams, , .

date: d-m-Y

Mobile knife folds

Heidelberg VF66, 2009
Ref.: 51632
Mobile knife fold.

Stahl VFZ52, 1992
Ref.: 51749


date: d-m-Y

Pressing stations

Stahl PS46.2, 1991
Ref.: 51026
Pressing station.

date: d-m-Y

Horizontal stack deliveries

Stahl SBP 66.2, 1991
Ref.: 46902
Horizontal stack delivery, Standard equipped.

Stahl SBP 66.2, 1993
Ref.: 49309
Standard, , Technicl specifications:, Max. size : 66 x 30 cm, Min. size : 12 x 10 cm, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Stahl SBP46.2, 1991
Ref.: 28673
Standard equipped, ., Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Stahl SBP46.2, 1991
Ref.: 49388
Standard equipped.

date: d-m-Y

Stream deliveries

Desta BA 510, 2001
Ref.: 51388
Equipped with: ., Siemens Simatic Panel control unit, , .

Desta BA 510, 2001
Ref.: 51389
Equipped with: ., Siemens Simatic Panel control unit, , .

Heidelberg SAK 94, 2005
Ref.: 51557
Stream delivery, Standard equipped.

MBO ASP66 ME, 1995
Ref.: 51745
Stream delivery.

Stahl SAL78, 1978
Ref.: 39665
Standard equipped, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

date: d-m-Y

Miscelleaneous

Stahl gate fold attachment,
Ref.: 41227
Standard, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Sewing

Aster 180 C, 2007
Ref.: 51529
Equipped with: ., Colour touch screen monitor, Automatic feeder, Opti control, Vacuum pomp, , .

Müller Martini Inventa II (3214), 1996
Ref.: 51221
Equipped with: ., Moveable control console with monitor and keypad, Feeder type 3212, Book stacker with roll conveyor to the right, , .

Müller Martini Inventa Plus (3214), 1997
Ref.: 51222
Equipped with: ., Moveable control console with monitor and keypad, Feeder type 3212, Book stacker with roll conveyor to the right, ., Original monitor not working., , Technical specifications:, Max. size : 385 x 320 mm, Min. size : 120 x 80 mm, Numberof stitches:, Standard stitch 2-10, Staggered stitch 2-5, Continuous stitch 2-9, Capacity : max. 200 cycles/min., , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Müller Martini Inventa Plus (3214), 1999
Ref.: 52020
Equipped with: ., Moveable control console with monitor and keypad, Feeder type 3212, Automatic signature control, Book stacker, with roll conveyor to the right, , .

Müller Martini Ventura (3215), 2006
Ref.: 51861
Equipped with: ., Automatic signature feeder, Commander with touch screen, 4+4 opening possibilities, Sewing unit, Book stacker, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams, , .

date: d-m-Y

Gathering

Kolbus ZU-Disk, 1994
Ref.: 51620
Large size gatherer upto 510 mm!, , Equipped with: ., 30 gathering stations model ZU-Disk, ., Technical details:, Min. size: 100 x 125mm, Max. size: 310 x 510mm, Pile height in transport channel: max. 80mm, Output : max. 10.000 cycles/h, ., Transfer into:, ., Ralissa compensating book block stacker year 2000, Equipped with: ., Pre-stacker, Delivery, ., Technical details:, Min. size: 100 x 170 mm, Max size: 320 x 510 mm, Speed, with pre-stacking and upto 50mm block thickness: max. 6.000 C/h, Speed, without pre-stacking and from 50mm upto 100mm block thickness: 3.000 C/h, ., Including pumps, , Further complete with: Instruction manuals, Spare part catalogues, Electrical wiring diagrams.

Müller Martini 1571, 1996
Ref.: 51255
Equipped with: ., 16 stations gatherer model 1571, Automatic signature thickness control ASAC, Automatic signature type control ASIR II, Pile delivery 3640, Without vacuum pumps - prepared for connection to a central air system), , .

Müller Martini 210-S, 1984
Ref.: 50947
Equipped with: ., Handfeeding station, 24 Stations, with incorrectly sheet control Opticamera (year 2005), Set up element, Electrical cabinet, Vaccuum pumps, Meccanotecnica counter stacker Ralissa (year 2008), , .

Kolbus ZU 801, 1992
Ref.: 47808
Gatherer for connection to a Kolbus KM 470 binder, , Equipped with: ., Handfeeding, 20 stations, Transfer to binder model KM470, Pumps, , .

date: d-m-Y

Gathering elements

Meccanotecnia Raccoglitrice MX, 1997
Ref.: 50939
2 elements available (each 3 stations), suitable for extension of a Multiplex gathering machine , Price per element EUR 9.000,-- as is, FCA.

Müller Martini 256 E, 1985
Ref.: 49413
Gathering element for extension , Excluding pump, Excluding chain.

date: d-m-Y

Stackers

Meccanotecnica Ralissa, 2008
Ref.: 51401
For connection with gathering machines, , Equipped with: ., Criss cross delivery function, Delivery roller belt, , .

date: d-m-Y

Miscelleaneous

Tec-Graf S 9810, 2001
Ref.: 51077
IR range, length : 4-5 meter.

Tec-Graf Silos, 2001
Ref.: 50213
Model S 9712, , Equipped with: ., Conveyor tower, (length conveyors: 45 m), , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Saddle stitching

Müller Martini 321, 1994
Ref.: 51785
Equipped with: ., 6 chain stations, 3 double universal bases, 5 signature feeders model 306, Pumps, Cover feeder model 1528, Feeder hoist, Stitching unit model 321, 2 stitching heads model HK75, Trimmer model 890, 2 sets of knives, Belt delivery, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Müller Martini Presto, 1997
Ref.: 52005
Equipped with: ., 5 station chain, 2 twin feeders model 1551 (4 feeding stations), Cover feeder model 1528, Stitching unit model 1550, 2 stitching heads model HK 75, Trimmer model 1522, (without vacuum pump), ., Stream belt delivery, , .

Müller Martini Prima Amrys, 1999
Ref.: 52004
Equipped with: ., 11 stations chain, 8 feeders model 370, Card gluer model 315 with Robatech premelter, Cover feeder model 1529, Oblique sheet control, Stitching unit model 390, Stitching control, 2 stitching heads model HK 75, Trimmer model 360, 2 setsof knives, 4th and 5th knife attachments, Vacuum pumps, ., Compensating stacker model Rapido typ0e 7525, with delivery table to the left, , .

Müller Martini Prima S, 2002
Ref.: 49347
Equipped with: ., 6 chain stations, 3 double universal bases, 5 Müller Martini signature feeders, model 370, age 4 x 2002, 1 x 1998, ASIR, 1 Müller Martini cover feeder, model 1528, Excluding pumps, Semko thickness control, Oblique sheet control, Stitching unit, model 390, 2 stitching heads, model HK75, Müller Martini trimmer, model 361, 2 sets of knives, Müller Martini cardgluer, model 315, age 2002 (exchageable) , with Robatech premelter Concept, Müller Martini compensating stacker, model Rapido, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams, , .

Müller Martini Prima S, 2001
Ref.: 49348
Equipped with: ., Age 2001/2002, 6 chain stations, 3 double universal bases, 5 Müller Martini signature feeders, model 370, age 3 x 2002, 2 x 1998, 1 Müller Martini cover feeder, model 344, Excluding pumps, Oblique sheet control, Stitching unit, model 390, 2 stitching heads, model HK75, Müller Martini trimmer, model 361, 2 sets of knives, Müller Martini compensating stacker, model Rapido, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Signature feeders

Müller Martini 370, 1997
Ref.: 48742
with shuttle feeder, Further standard equipped.

Müller Martini 306,
Ref.: 50918
Signature feexder, Old style feeder, 2 suckers.

date: d-m-Y

Cover feeders

Müller Martini 1528, 2002
Ref.: 50066
Cover feeder, Excluding universal base, Excluding pump, Further standard equipped.

date: d-m-Y

Card gluers

Muller Martini 315, 2003
Ref.: 48448
Suitable for Müller Martini Bravo/Prima , With Nordson hotmelt.

Müller Martini 423, 2006
Ref.: 48450
Suitable for Müller Martini Bravo Plus or Prima Plus, With Robatech hotmelt.

Muller Martini 315, 1997
Ref.: 51316
Card gluer suitable for MM Prima.

Müller Martini 315, 1993
Ref.: 42919
Robatech glue Roba 30.

Müller Martini 315, 1992
Ref.: 44852
Müller Martini 315.0402 card gluer, With Robatech preheater type Roba 30, age 1992, Excluding universal base, Excluding pump, ., To be mounted on a single or double universal base, suitable, for MM 321/335/300..

date: d-m-Y

Compensating stackers

Harris RS10, 1983
Ref.: 39361
Standard equipped.

Müller Martini Pratico, 1997
Ref.: 51241
Compensating stacker, , Equipped with: ., Roller belt delivery, , .

Müller Martini Pratico, 2000
Ref.: 51262
Compensating stacker, , Equipped with: ., Roller belt delivery, , .

Rima 2512, 1988
Ref.: 50917
Standard equipped.

date: d-m-Y

Miscelleaneous

Müller Martini mini-infeed,
Ref.: 49811
5 x MM mini-infeed, Suitable for feeders 370 (Prima/Bravo).

Muller Martini Trio Cut,
Ref.: 43555
Müller Martini trio cut cutting device for Müller Martini trimmer 449, excluding knives., Müller Martini Dreischnitteinrichtung für Müller Martini trimmer 449, exkl. Messer., Müller Martini driesnede-inrichting voor Müller Martini trimmer 449, exclusief messen..

date: d-m-Y

Three knife trimming

Kolbus FA 650, 2015
Ref.: 51772
Equipped with: ., TFT touchscreen, Special equipment for cutting two products during one cycle, Vacuum belts to open the cover, Opening control, Cutting unit, 2 fine-grained hard metal knives, Knife setting gauge with dial indicator, Swivelling electrical cabinet at the machine, Machine start via block detection device and light barrier, Servo-controlled drive technology based on Siemens SIMOTION.D, Raising of the machine by 300 mm (infeed and delivery height approx 1.180 mm), With through-feed mode, , .

Kolbus HD 150.B, 2005
Ref.: 50908
Equipped with: ., Right hand infeed, Counter stacker, Optical speed indication, Pile magazine for products thicker than 5 mm, Transport by grippers, Knife setting gauge, Standard cutting tables (no. 7-18), Motorized adjustment for pressing block height,side knives,, cutting table and alignment of the block height, Cut counter, Silicone spray device, 2 sets of knives, , .

Kolbus HD 152.P, 2005
Ref.: 51591
Equipped with: ., Infeed from the right, Co-Pilot with touch screen monitor, Counter stacker, Device for shingled stream infeed with magazine mode, Pile magazine for products thicker than 5 mm, Standard set of cutting tables (7-18), Transport by grippersKnife changing device, 2 sets of knives, , .

Kolbus HD 153.P, 2008
Ref.: 50869
Equipped with: ., Right hand infeed, Co-pilot with touch screen monitor, Counter stacker, products thickness max. 30 mm, Device for shingled stream infeed with magazine mode, Standard cutting tables (no. 7-18), Transport by grippers, Knife setting gauge2 sets of knives, Silicone spray device, , .

date: d-m-Y

Book splitters

Kolbus TR 160, 2000
Ref.: 45603
Splitting saw, for splitting two-up perfect bound or , thread sewn book blocks and brochures, to be used in , book production lines in front of a three knife trimmer , , Equipped with: ., Infeed from the right, Turning conveyor, , .

Kolbus TR 160, 2012
Ref.: 47549
Equipped with: ., Left hand infeed, Straight transport to the infeed conveyor, Turning conveyor left, conveyor right (turnable) with transfer conveyor, Raising of the machine by 150 mm, , .

Kolbus TR 160, 2012
Ref.: 48907
Equipped with: ., Left hand infeed, Straight transport to the infeed conveyor, Turning conveyor left, conveyor right, with transfer conveyor, Raising of the machine by 300 mm, , .

Müller Martini 3502, 2010
Ref.: 51216
Equipped with: ., Integrated prestacker, 1 saw blade, Belt delivery with turning device, , .

Wohlenberg TS 8000, 2000
Ref.: 50503
Equipped with: ., Turn-over belt with crossband, , .

Kolbus BDS, 2005
Ref.: 49551
Equipped with: ., for 2 x 90 degree turning, without drive unit.

date: d-m-Y

Book stackers

Kolbus XRS 130, 2000
Ref.: 51214
Model RS3310-S, , Equipped with: Delivery to the left and right, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Müller Martini CB15, 1987
Ref.: 34505
Book stacker, Standard equipped, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

OMG stacker,
Ref.: 49756
Equipped with: ., Delivery to the left and right.

Rima RS3310-S, 2007
Ref.: 51866
For cross stacking after a three knife trimmer,, for stacking of book blocks, brochures and magazines, ., Equipped with: ., Delivery to the right with roller conveyor, , .

date: d-m-Y

Miscelleaneous

Müller Martini Center Cut,
Ref.: 46869
Center cut / 4th+5th knife attachment, Suitable for trimmer 360/361/449, Including 1 set of knives.

Müller Martini Center Cut,
Ref.: 46954
Center cut / 4th+5th knife attachment, Suitable for trimmer 360/361/449, Including 1 set of knives.

Müller Martini Center Cut,
Ref.: 46989
Müller Martini center cutting device for Müller Martini trimmer 360 / 361 & 449, excluding knives., Müller Martini Trennschnitteinrichtung für Müller Martini Trimmer 360 / 361 & 449, exkl. Messer., Müller Martini deelsnede-inrichting voor Müller Martini trimmer 360 / 361 & 449, exclusief messen..

date: d-m-Y

Case making

Hoerauf BDM Compact 45, 2010
Ref.: 51781
Only approx. 415 operation hours!, , Equipped with: ., Board feeder, Unwind for flexible spine, Cover material feeder, Viscosity control, Colour monitor, Delivery belt, Corner cutter, , .

Kolbus DA 232, 2006
Ref.: 50440
Equipped with: ., Copilot system with “touch screen” monitor, Board prestacking conveyor for automatic magazine reloading (stream feeding), Cloth feeding conveyor for stream feeding or feeding of cloth piles up to 100 mm, Centre strip infeed for the spine strip made of roll material, holding capacity for 3 centre strip rolls, longitudinal and cross cutting device, Chopper for the centre strip waste, Device for pasting and changing of endless spine strip with the machine running, Misfeed and double clothcontrol during the separation process, Counter stacker delivery with following roller conveyor to the right, Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller, Glue application adjustment from outside of the machine, Viscosity control device, Pressing roller device for crease-free connection of the cover material with boards and spine strip, Device for inside lining with hot-glue, Device for producing padded casesAutomatic case counter, Head and tail turn-in by rotating system with long turning-in time, incl. pressure intensifier, , Additional equipment:, Board cutting device PS, Template for preparing rubber pads, Pneumatic corner cutter for single corner cutting model ECK 100, Tool cabinet, , Coupling with: , 1 KOLBUS Case Palletiser PL 740, year 2006, Portal robot with 3 linear axes and 1 rotational axis, Horizontally opening parallel gripper with sucker system for slip sheets, Coupling conveyor with case control station resp. hand feeding station, Accumulating conveyor with 3 places for taking-off the cases, 1 pallet station for cases, 1 pallet station for slip sheets, Touch screen with „UNIPACK“ generator for palletizing patterns, Palletising booth with fence wire guarding and sliding doors, , Change of at a speed of 85 cycles/min by the upstream machine pallets: there will be 45 seconds left f, or a pallet change without being forced to slow down the machine, on condition that the pallet height is constant.

Kolbus DA 260, 2008
Ref.: 51871
Equipped with: ., Without device for processing centre strip rolls (special), Board magazine for manual loading, Board centre strip magazine, Cloth feeder for interval charging with pile magazine,, max. stacking height 350 mm, Miss cloth control during the separation process, Moveable gluing station for processing hot-glue with glue preparation unit, in the premelter, heated glue application roller and scraper roller, Cloth cylinder with grippers and exchangeable plates for rubber pad, Glue applicationadjustment from outside of the machine, Viscosity control device for automatic water supply to, ensure constant glue viscosity, Pressing roller device for crease-free connection of the, Device for producing padded cases, Automatic case counter, Single case request for control purposes done from the operating side, Counter stacker delivery with following roller conveyor incl. table, ., Device for small format, Corner cutter (operation by hand), Tool cabinet, , Further complete with: Instruction manualsElectrical wiring diagrams, Standard accessories.

Kolbus DA-Chronos 240, 1999
Ref.: 51318
Equipped with: ., Prestacking conveyor with time control, Centre strip roll device, Cloth feeder for nonstop processing (moveable), with pile magazine (max. stack height 160 mm), Timer for glue pre-heating, Motorized format adjustments, Digital displaysCirculation pump for glue, incl. heated glue tube, Separate drive of board transport unit, Device for producing quarter-bound cases in 2 passes, Device for producing padded cases, Automatic case counter, Counter stacker delivery (max. height 90 mm), Board cutting device PS, Board centre strip magazine (third feeder), Viscosity control device, , .

date: d-m-Y

Cloth cutters

Pasquato TE15/DC, 1998
Ref.: 47993
Sheeter, model TE15, Working width 1500 mm, , .

date: d-m-Y

Foil embossing

Kolbus PE, 1968
Ref.: 46535
Equipped with: ., Standard equipped.

date: d-m-Y

Miscellaneous

Kolbus NM 100, 2014
Ref.: 50982
Grooving machine, For cutting grooves into board blanks. , , Equipped with: Automatic infeed with magazine or manual infeed via hand feeding unit, Stack or shingled board delivery via conveyor belt on 1.400 mm height, Automatic groove waste delivery outof the machine, Grinding device, Knife holders, Gauge for setting the knife holders, Product delivery to the right with roller conveyor, , .

Kolbus PL 770, 2007
Ref.: 51923
Equipped with: ., Product feeding via accumulating conveyor, Turning paternoster 90 degrees/180 degrees with cycle adjustment device, Pallet magazine on the left for 8 pallets, Feeder for slip sheets on the left, Travelling stop for setting down especially smooth products, Straight pallet delivery, Taking off the pallets in running direction, ., Additional equipment:, Device for automatic format adjustment, Pusher for products up to min. 1 mm, Air table (for palletizing sensitive products), Suction device for processing slip sheets of porous materials, , .

Kolbus SW.G 500, 2015
Ref.: 51937
Box case processing line, For producing of boxes, ., Equipped with: ., Telescopic infeed belt model TS.T, Case transfer model TS.DU, Conveyor system model TS.L, Case turning device model SW.W 400, Aligning device model SW.R 500, Gluing system for gluingbox cases, Servo-controlled drive technology base on Siemens SIMOTION D, ., Modules (can be used alternatively), 1 Kolbus blank placing module, SW.Z 400, year 2016, Delivery via pressure system with rollers and conveyor belt, length 1.000 mm, ., 1 Kolbusbox placing module, SW.B 400, year 2015, Delivery via conveyor belt, length 1.000 mm, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Kolbus SW.M 400, 2015
Ref.: 51936
Magnet inserter, ., Equipped with: ., 4 magnet magazines, Magnet spearation with monitoring , incl. 4 tools for magnet separation, magnet thickness 2 mm, Sucher for magnet placing with monitoring, Labeller, Servo-controlled drive technology based on Siemens SIMOTION D, Infeed with board feeder type SW.A 400, lenght 1.200 mm, , .

Stahl/VBF EKS400, 1994
Ref.: 48578
Corner cutter, Standard equipped.

date: d-m-Y

Book block production

Ochsner fully automatic edge gilding machine, model GA, 1989
Ref.: 49535
Equipped with: ., Insert station, model Ochsner ES with holding down equipment (serial OCH 1424), Electro-pneumatic grinding stations, Regulation of grindings, Gilding station, Brush with sucking off dust, Priming station upper part, Electric steering and controlling desk, ., Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Nipping and pressing

Sigloch NHG-60/2, 2004
Ref.: 52003
Book block nipping and smashing press, For nipping the fold in thread-sewn book blocks , with subsequent pressing on their entire surface. , , Equipped with: ., Handfeeding, 2 pressing stations, Spring-loaded pre-pressing jaws, Straight delivery, , .

date: d-m-Y

Book mark inserting

Sigloch LEH1, 1994
Ref.: 51101
Equipped with: ., Standard equipped, , .

date: d-m-Y

Spine gluing

Gantenbein Bufalo BAFC 33, 1971
Ref.: 51062
Equipped with: ., Semi automatic spine gluing machine, Handfeed box, Pressing device, Milling roller, Notching roller, Dust exhauster, First gluing roller, Second gluing roller, Delivery grid, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Compact flowlines

Profinish dust jacketing machine, model Jackplus, 1999
Ref.: 50117
Standard equipped.

date: d-m-Y

Casing-in

Kolbus EMP 511, 2010
Ref.: 51892
Used for casing-in flat spine, rounded and backed book blocks into hard, flexible or plastic cases,, as well as subsequent pressing and joint forming of the book joint., , Equipped with: ., Co-pilot system with touch screen monitor, Block supply via manual feeder, Control unit for the controlled, individual infeed of the book blocks with barrier, Case prestacking conveyor, Case bending machine, Case forming station, Case magazine, Pointed and bottom splitter for flimsy papers and gilt edge, Rubbing downunit, Hotmelt nozzle gluing system for joint gluing, incl. ROBATECH premelter CONCEPT, Glue circulation system with pump, EMP glue pump monitoring unit, Quick-change system for joint forming rails, 2 pressing stations, Heater monitoring unit, Delivery tothe left, flat lying book transport, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams, , .

date: d-m-Y

Building-in

Kolbus FE 603, 2000
Ref.: 44864
Equipped with: , ., Infeed from the right, Delivery to the right, Integrated hydraulics, Standard accessories, , .

date: d-m-Y

Stackers

Kolbus DS 390, 1998
Ref.: 42058
Model Kolbus DS 390 VARIO, ., Equipped with: Left hand infeed, Turning device 180 degrees, Pass through equipment, Pile delivery against moving direction, , .

Tecnograf Tecno 100, 2004
Ref.: 50225
Book stacker , , .

VBF BLSD 600 D, 1998
Ref.: 50118
Standard equipped, , .

date: d-m-Y

Perfect binding

Kolbus KM 472.A, 2001
Ref.: 46860
Kolbus perfect binding line, model KM472.A, age 2001, ., Equipped with: ., Handfeeding for 2 persons, 24 stations gatherer model ZU804, Stacking delivery with reject system for incomplete products, model ZA800, Setup element, Endsheet tipping unit, Transfer into the binder, ., Kolbus Ratiobinder KM472.A, 27 clamps, Main milling station, First spine preparation unit, Second spine preparation unit, Third spine preparation unit, Base for 1st spine glue unit, Exchangeable coldglue spine gluing unit, Base forsecond spine glue unit, Exchangeable hotmelt spine gluing unit, Exchangeable cold spine glue unit, Base for side glue unit, Exchangeable hotmelt spine glue unit, Premelter LH for hotmelt spine gluing unit, Gauzing station, Stream cover feeder, First nipping and pressing station, Second nipping and pressing station, Straight delivery with laydown device, ., Conveyor system consisting of:, Conveyor belts, Drying tower, Escape delivery, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Kolbus KM 600, 2011
Ref.: 50770
Kolbus perfect binding line for short runs/digital printing, For the production of brochures and book blocks, Year 2011, , Consisting of: , ., End sheet gluer VA 423.A, Handfeeding, Hotmelt nozzle gluing system with NORDSON premelter, LOGICOM nozzle gluing control, Transfer to the binder, ., Ratiobinder KM600, Co-pilot with touch screen, 21 clamps, Infeed incl. coupling to an end sheet gluer, Milling station (swivellable for tool change), Spine preparing unit for roughening, Brushing station with roller brush, PUR spine gluing unit, NORDSON smelting unit (Kolbus XNO 961), Hotmelt side gluing unit, Lining station, IR heating at curve, Rotary cover feeder RA 49.A, Barcode-Matching-System to compare the barcode from book block and cover, Double sheet controlSpecial equipment for the production of covers with pre-folded and folded-in covers, Scoring station for 4 scores, 2 pressing stations, Straight delivery, Lay down device, ., Transport and drying line, Length approx. 20 meters, Incl. intermediate delivery TS.ZM (manual), ., High capacity three knife trimmer HD 143.P, For three side trimming of book blocks and brochures, used as an , individul machine or as a unit within book production lines, Standard equipment: , Co-pilot with touch screen, Right handinfeed, Standard cutting tables (no. 4-18), Knife setting gauge, Cut counter, 2 sets of knives, ., Additional equipment:, Silicone spay device, Busch waste removal conveyor, Delivery roller conveyor, ., 1 NESTRO dust removal unit for KM 600 (Kolbus XNE 250), 3 moveable dust barrels with waste bag, , .

Kolbus KM 600, 2011
Ref.: 51952
Consisting of: , ., Gathering machinde ZU 832.A, age 2008, 12 stations basic frame, 12 standard feeders with SignaLynx recognition system, and automatic section thickness control ATC, Transfer channel with jogging station, Air center, , End sheet gluer VA 423.A, age 2011, Handfeeding, Hotmelt nozzle gluing system with NORDSON premelter, LOGICOM nozzle gluing control, Transfer to the binder, ., Ratiobinder KM600, age 2011, Co-pilot with touch screen, 21 clamps, Infeed incl. coupling to an end sheet gluerMilling station (swivellable for tool change), Spine preparing unit for roughening, Brushing station with roller brush, PUR spine gluing unit, NORDSON smelting unit (Kolbus XNO 961), Hotmelt side gluing unit, Lining station, IR heating at curve, Rotary cover feeder RA 49.A, Barcode-Matching-System to compare the barcode from book block and cover, Double sheet control, Special equipment for the production of covers with pre-folded and folded-in covers, Scoring station for 4 scores, 2 pressing stations, Straight delivery, Lay down device, ., Transport and drying line, Length approx. 20 meters, Incl. intermediate delivery TS.ZM (manual), ., High capacity three knife trimmer HD 143.P, age 2011, For three side trimming of book blocks and brochures, used as anindividul machine or as a unit within book production lines, Standard equipment: , Co-pilot with touch screen, Right hand infeed, Standard cutting tables (no. 4-18), Knife setting gauge, Cut counter, 2 sets of knives, ., Additional equipment:, Siliconespay device, Busch waste removal conveyor, Delivery roller conveyor, ., 1 NESTRO dust removal unit for KM 600 (Kolbus XNE 250), age 2011, 3 moveable dust barrels with waste bag, , .

Kolbus KM 600, 2013
Ref.: 50958
Equipped with: ., Gathering machine ZU 805, Short handfeeding, 16 stations with automatic section thickness control ATC, Transfer channel as connection unit to the binder with integrated jogging station, Becker air center, ., Ratiobinder KM 600, Co-pilotwith touch screen, 21 clamps, Infeed incl. coupling to a ZU gathering machine, Milling station (swivellable for tool change) with milling head for roughening and exhaust control, Spine preparing unit for roughening, Spine preparing unit for notching, Brushing station with roller brush, Hotmelt spine gluing unit, Premelter LH 375.B, Hotmelt side gluing unit, IR heating at curve, Rotary cover feeder RA 49.A, Double sheet control, Special equipment for the production of covers with pre-folded and folded-incovers, Scoring station for 4 scores, Pressing station, Straight delivery, Lay down device to the left, ., Transport and drying line, length approx. 15 meters, incl. intermediate delivery TS.ZM (manual), ., High capacity three knife trimmer HD 143.P, Co-pilot with touch screen, Right hand infeed, Standard cutting tables (no. 4-18), Knife setting gauge, Cut counter, 2 sets of knives, Silicon spraying device, ., Compensating stacker XKL 300, Pneumatic turnable for 0 or 180 degree turn, Delivery to the rightwith delivery conveyor, Delivery to the left with roll conveyor, ., BVM shrink wrapping machine BMS 6030 L (Kolbus XBV 120), year 2013, Shrink wrap tunnel SC 6530 S, Roll conveyor, ., Kolbus 360 degree service portal AFS 702.A, ., Optionally:, 1 Kolbus PUR interchangeable spine gluing unit, Condition : NEW, ., 1 Nordson smelting unit DuraPail type 729340, year 2006, For smelting of PUR glue, - for 20 liter steel barrels, - with heated tube, length 4,90 meter, Condition : cleaned and function checked, Package price : EUR 34.500,- EXW, , .

Müller Martini Panda, 1991
Ref.: 51394
Equipped with: ., Gathering machine 1531, Handfeeding station, 16 stations, of which 10 stations with Opticontrol OSC-1, Setup element, Transfer to the binder, Vacuum pumps, ., Perfect binder Panda (1530), Handfeeding station, 9 clamps, Milling station with waste exhauster, Hotmelt spine gluing unit, Premelter, Hotmelt side gluing unit, Interchangeable coldglue spine gluing unit, Pile cover feeder with vacuum pump, Continuous pressing station, Universal stack delivery with pass through equipment, and following turn-over device, Vacuum pump, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Wohlenberg Champion 8000, 1998
Ref.: 50439
Equipped with: ., Hand feeding station, 20 gathering stations model Sprinter 7011, with automatic sheet thickness control ACC, with incorrectly sheet control Opticontrol, Criss cross delivery, Transfer into the binder, Vacuum pumps, ., Wohlenberg Champion 8000 perfect binder, 28 clamps, Book block feeder on the left, book block feeder on the right, Endsheet tipping station with HHS cold glue system, Infeed station, Main milling station, 4 spine preparation units, Cold glue spine gluing, Cold glue sidegluing, Interchangeable hotmelt spine gluing with premelter, Gauzing station, Rotary (pile) cover feeder with Nordson nozzle gluing, Nipping and pressing station, Strayfield high frequency dryer 12KW, Second nipping and pressing station, Laydown deliveryConveyor system excluding three knife trimmer, incl. escape delivery, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Wohlenberg City e 6000, 2011
Ref.: 50382
Equipped with: ., Handfeeding station, 24 stations gathering machine, model Sprinter E, Pump, Reject unit, Criss-cross delivery, Vibrating element, Transfer into the binder by 90 degree turn to the left, 15 clamps (19"), Milling and roughening station, Hotmelt spine gluing with integrated premelter, Hotmelt side gluing with integrated premelter, Pile cover feeder, Pump, First pressing station, Laydown, Approx. 20 m conveyor system, T-junction (escape delivery) to three knife trimmer or roller belt, ., Wohlenberg Trim Tec 60 i three knife trimmer, year 2011, With belt delivery , , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

Wohlenberg Golf 370, 1991
Ref.: 51452
Equipped with: ., Handfeeding station, 16 stations gatherer, Criss Cross delivery, Book block feeder, Spine milling and preparation unit, Hotmelt spine gluing with premelter, Hotmelt side gluing, Coldglue spine gluing, Coldglue side gluing, Drum cover feeder, Gauzing station, Vertical delivery, Laydown delivery, Several transport belts, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Gathering

Müller Martini 3681, 2005
Ref.: 48245
2 separate double universal bases,, model 3681.

date: d-m-Y

Log feeders

Kolbus STA 840, 2007
Ref.: 51770
Price per feeder, In total 16 feeders available, , For automatic feeding of the gathering machine to work , with pressed bundle material., Mounting of the bundle feeders on the right side of the ZU., ., Swivelling feeding conveyor, Potentiometer for the setting of the section thickness, Automatic adjustment to the speed of the ZU for a continuous , Product flow into the ZU magazine (optimized drop height), Laterally running chains with electromotive adjustment by +/- keys to break the bundles, Pneumatic lift birder with roller conveyor for an easy handling when feeding additional bundles, Toothed chain for feeding new bundle sections by hand, Moveable by lock-type swing wheels, Loading length: approx. 3.400 mm, , Size range (width x height):, max. 320 x 510 mm, min. 105 x 160 mm, section thickness: max. 6 mm, feeding height: approx. 665 mm, mech. speed: max. 18.000 cycles/h, ..

Kolbus STA 840, 2008
Ref.: 51771
Price per feeder, 2 feeders available, , For automatic feeding of the gathering machine to work , with pressed bundle material., Mounting of the bundle feeders on the right side of the ZU., ., Swivelling feeding conveyor, Potentiometer for the setting ofthe section thickness, Automatic adjustment to the speed of the ZU for a continuous , Product flow into the ZU magazine (optimized drop height), Laterally running chains with electromotive adjustment by +/- keys to break the bundles, Pneumatic lift birderwith roller conveyor for an easy handling when feeding additional bundles, Toothed chain for feeding new bundle sections by hand, Moveable by lock-type swing wheels, Loading length: approx. 3.400 mm , Size range (width x height):, max. 320 x 510 mmmin. 105 x 160 mm, section thickness: max. 6 mm, feeding height: approx. 665 mm, mech. speed: max. 18.000 cycles/h.

Müller Martini 3736, 1995
Ref.: 43553
2 x Muller Martini stream feeders model 3736, Price each EUR 1.500,--..

date: d-m-Y

Glue systems

PUR spine glue with premelter, 2005
Ref.: 50823
Kolbus PUR spine gluing unit with Nordson premelter BM 200, suitable for Kolbus KM 473.

Inatec BS 2130 PUR, 2001
Ref.: 51391
Inatec Premelter BS 2130 PUR with, Kolbus PUR spine gluing unit, , Suitable for Kolbus KM 472.A.

Nordson Durablue premelter, 2005
Ref.: 47703
Nordson Durablue 394452, age 2005, Suitable for premelter hotmelt.

Wohlenberg coldglue side gluing, 2000
Ref.: 51067
with coldglue pump, suitable for Wohlenberg Master.

date: d-m-Y

Conveyors

Müller Martini escape delivery, 2005
Ref.: 51264
Original Müller Martini escape delivery for conveyor system.

date: d-m-Y

Palletizers

Müller Martini Cohiba, 2003
Ref.: 50188
Equipped with: ., Touchscreen operation, Infeed conveyor, model 6214, Turning station, Buffer section, Stacking robot, Intermediate sheet inserting section, Pallet feeder, Pallet conveyor system, Pallet delivery station, Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Müller Martini Fontana, 2007
Ref.: 47254
Equipped with: ., WST blocking unit, type EV 1000, (Manufacturer WST), ., Müller Martini conveyor belt, type 6215 FJ55, Year 2007, Müller Martini pile jogger 6232 SC13, Year 2007 , Müller Martini turning station SD81, ., Müller Martini automatic palletizer, Fontana, Year 2007, With touch screen monitor, With intermediate cardboard slip sheet hopper, ., .

WST Doctor, 2003
Ref.: 51215


date: d-m-Y

Book block feeder

Wohlenberg BZB, 2000
Ref.: 51064
for Master 6501.

date: d-m-Y

Miscelleaneous

Kolbus De-stacking unit, 2014
Ref.: 49706
Kolbus de-stacking station, model AE 360, Including:, Telescopic infeed conveyor TS.T, Left hand delivery incl. delivery conveyor TS.L, Electrical cabinet, Vacuum pump, , .

Kolbus turning device, 2014
Ref.: 49707
Kolbus linear turning conveyor TS.LW, including infeed conveyor TS.L..

Nordson Durapail, 2006
Ref.: 48337
Typ 729340, Smelting unit for PUR glue, for 20 liter steel barrels, with heated tube, length 4,9 m.

date: d-m-Y

Drilling

Dürselen Corta PB 09, 2000
Ref.: 51849
Automatic 4-head drilling machine, , Equipped with: ., Automatic infeed belt, Jogging section, 4-head drilling section, Delivery with automatic delivery belt, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

Hang 106DT20,
Ref.: 34102
Equipped with: ., 2 head drilling machine.

Hang 245-00,
Ref.: 49511
Equipped with: ., Suitable for drilling welded or sealed calendar blocks, can be connected to shrink-wrapping machine, for drilling 2 or 4 holes, drill lubricating & cooling device, automatic indexing drill matrix to protect drill heads, drilling range:3-14 mm, drilling length: 30-80 mm, steplessly changeable spindle stroke, changeable drill rotation speed: 150-2500 min/1, 4 drilling heads: 36 mm, , .

Iram 16, 1985
Ref.: 43349
2 head drilling machine, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

Iram 16, 1985
Ref.: 43350
2 head drilling machine, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Foil sealing

Beck Pico, 2008
Ref.: 51783
Beck-Multiplex Pico, , Form, fill and seal machine, , Equipped with: ., · Movable control panel with product data memory, · Constantly heated low maintenance sealing tools, ., Beck shrink tunnel, · , Technical Specifications, Max. working width20-400 mm*, Height of opening250 mm*, Max. performance60 cycles/min*, *depending on the product, feed and film, , , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

OMG Autofard 600, 2001
Ref.: 42742
Foil sealing machine, Standard equipped, , .

OMG Autofard 600C, 2001
Ref.: 40673
Foil sealing machine, Including shrink wrap tunnel, , .

Polypack POLY.UAB2060, 2006
Ref.: 51092
Foil sealing machine.

Smi Pack FP S560 NA, 2007
Ref.: 48717
L-sealing hood packer, Standard equipped, , .

Müller Martini 6257/6216, 2003
Ref.: 50189
Foil sealing machine.

Siat AF3CF1, 1998
Ref.: 50202
Pallet sealing machine , Standard equipped, With photocell.

Beck KV540.ON, 1999
Ref.: 50916
Foil sealing machine, Standard equipped, Including shrink tunnel.

Kallfass Pack Jet 4000, 1999
Ref.: 50326
Equipped with: ., Kallfass Compact 650 SO shrink tunnel, Belt delivery, , Further complete with: Instruction manuals, Spare part catalogue, Electrical wiring diagrams.

date: d-m-Y

Strapping

Mosca RA-A-55, 1983
Ref.: 45081
Strapping machine.

Signode UNI-300, 1998
Ref.: 46644
Strapping machine, Standard equipped.

Akebono TS-250, 1991
Ref.: 42521
Model TS-250.

date: d-m-Y

Spiral binding machines

Rilecart WireBind, 2005
Ref.: 51776
Rilecart WireBind double wire binding & punching machine, , Consisting of: , ., Rilecart Wirebind TP-340 double wire binding machine, year 2005, Semi-automatic binding machine with electronic closing adjustment, , Equipped with: ., Manual feed, Automaticinput of diameter and number of loops, Delivery conveyor, , .

date: d-m-Y

File protection machines

Hang 150-05, 2008
Ref.: 51779
Automatic twin-head rivetting machine, , Equipped with: ., Brake motor drive, Automatic infeed of rivets, Upper and lower die, Working table with adjustable gauges, Finger guard, , .

Hang 332-01, 2008
Ref.: 51780
Creasing machine, For creasing cardboard from 0,8 - 3,0 mm thickness, by means of creasing and bending principle, , Equipped with: ., Manual infeed of covers, Stacking device for manual pre-stacking of the flat cvers, Creasing depth adjustable, Working table with side stoppers left and right, ., Width of creasing line adjustable between 3-12 mm, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

date: d-m-Y

Miscelleaneous

Cologic VCZ,
Ref.: 51559
Waste removal unit.

Corner Cutter,
Ref.: 51822
Standard equipped.

Gemini box closing machine,
Ref.: 51734
Standard equipped.

Gemini box closing machine,
Ref.: 51759


Gemini box closing machine,
Ref.: 51760


Sperr & Lechner, 1994
Ref.: 51737
Double spine press.

Still pallet truck,
Ref.: 46885
Pallet truck with scissor lift, Without charger, , Max. load: 1.000 kg, Max. lifting height: 800 mm.

Tranklein BP,
Ref.: 51757


Veb Poma, 1974
Ref.: 48719
Gold foil press, Standard equipped, ., Max. size 350 x 240 mm, , Further complete with: Instruction manuals, Spare parts catalogue, Electrical wiring diagrams.

Schmedt Präcoll HHS 11, 2000
Ref.: 51070
Type 1120, Gluing unit.